Proximity Sensor - 3 mm Diameter, Shielded, Normally Closed - NPN Wintriss Repair Parts which makes it useful to

which makes it useful to detect holes

You can also use the standard sensor connector to connect to the front panel of the Wintriss DSI 2

fast-moving

*Input for machine running/stopped signal

Up to 8 die-mounted sensors can be wired to the 12-pin terminal block

Proximity Sensor - 3 mm Diameter, Shielded, Normally Closed - NPN Wintriss Repair Parts which makes it useful toWintriss offers this 3mm diameter shielded proximity sensor as a useful sensor for detecting small features, especially when space inside the die is at a premium. This sensor has an unthreaded housing and should be epoxied into a slip fit hole. If the sensor is to be removed from the die during maintenance, epoxy it into a removable bush or insert. This inductive proximity sensor is Normally Closed; it actuates (turns On) when metal leaves the sensing