Sensor Connector (for DSI 2 front Panel) Shadow 9 or 0~10V) for process parameter

or 0~10V) for process parameter monitoring with user-supplied sensors

These ProCamPAC modules are available with 8 or 16 channels and are compatible with SmartPAC 1

The receiver only needs to detect a very small amount of light from the emitter for the sensor to actuate

If you have more sensors to connect

This 12 mm diameter shielded inductive proximity sensor is one of the most useful general-purpose die protection sensors

Sensor Connector (for DSI 2 front Panel) Shadow 9 or 0~10V) for process parameterThe SV 40 Male connector is used when you want to connect an individual sensor to the DSI 2 front panel. These connectors should be soldered to the sensor cable end. The sensor wiring is as follows: Pin #1 +24V Sensor Power (Brown wire) Pin #2 Power Return Ground (Blue wire) Pin #3 Sensor Signal Wire (Black or white wire)